|
C&L Performance MAF Units
Universal MAF MAF With
Flange Adapter SPECS These MAF's are 73mm and flow an average of 700cfm while
the stock MAF is only 63mm and flows 550cfm. There are two MAF's available. A
universal MAF without a 4-bolt flange that must be custom installed by you,
which will/may require cutting of your intake tube and/or special adapters. The
second MAF is a custom Zabteck product and has a 1/4" thick, 4-bolt flange
welded to it that allows this unit to be directly bolted in to almost every V6, Both MAF's includes the proper anti-theft torx bit to remove the screws on the MAF Sensor. **NOTE: Although no computer tuning is required to
install this MAF, Zabteck Performance recommends that if you have an SCT computer
flasher, you contact Doug Studdard at BamaChips for an updated tune that
will allow you to gain the maximum benefit from adding the C&L MAF. Standard
tuning charges apply.** PRICING C&L Performance Universal 73mm MAF.............$185 C&L Performance 73mm MAF With Welded 4-bolt Flange.....$245 All prices include shipping.
ALSO DON'T FORGET...
|
|
